audiovox aa 925

Hi everyone. A while back I installed an aftermarket power door lock kit on my vehicle. This was a Magicar FAI-820 Keyless Entry System( 2 remotes, 2 actuators, and control box) the actuators were probably made by a different company. Well anyways, my remotes have started to fail and I wanted a more alarm type system so I took a trip to the local auto parts store and purchased an Audiovox AA-925 Keyless Entry System. My problem is connecting the power door locks for this system, im really not sure if my current system is positive or negative, or if I connect the Audiovox to the aftermarked Magicar system, or just bypass that entirely. All i know is that both actuators have 2 wires coming off of them that run into the magicar system. The attacked picture is basically how the actuators are set up now. I'm not sure if I need relays or what but any help or input would be great. Thank you so much for your help!

Sorry i didn't explain the picture better.   That picture was my old setup. I have removed all that. This picture is of my new setup.   The actuators have a Blue and a Green wire running off of them. If i hook them directly to the red and the green noting happens. So i'm assuming that either i have to make some relays or run my new system back into the old system (previous picture).Thanks again for your help.