the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

panic alarm set off


Post ReplyPost New Topic
< Prev Topic Next Topic >
dezracer 
Member - Posts: 3
Member spacespace
Joined: October 19, 2007
Location: Nevada, United States
Posted: October 20, 2007 at 7:11 PM / IP Logged  

2001 chevy silverado 2500hd put a remote start avital 4100 with 1700G sometime when i use the 4100's remote to unlock the doors it set off the oem panic alarm it doesn't do it with any regular pattern any help thanks!!! Scott

techman93 
Silver - Posts: 591
Silver spacespace
Joined: October 28, 2006
Location: Pennsylvania, United States
Posted: October 20, 2007 at 11:47 PM / IP Logged  
Did you tap into alarm disarm wire?
|FACTORY ALARM DISARM |light green            |-|drivers kick *4             |*4 Also found in the purple plug of the BCM.
dezracer 
Member - Posts: 3
Member spacespace
Joined: October 19, 2007
Location: Nevada, United States
Posted: October 21, 2007 at 11:36 AM / IP Logged  
No I didn't hook it up to the factroy alarm don't think it has one? just the panic alarm. I did hook it up to the after market alarm so it would allow remote start. Would the lt green wire be the same? Also on the 1700g has a lead to hook up to the panic alarm were do you find this wire? Thanks for all the help!!!
techman93 
Silver - Posts: 591
Silver spacespace
Joined: October 28, 2006
Location: Pennsylvania, United States
Posted: October 21, 2007 at 11:37 AM / IP Logged  
What kind of after market alarm does it have? If it has both you need to make sure you are hooking up so the OEM alarm and after market know not to false alarm.
dezracer 
Member - Posts: 3
Member spacespace
Joined: October 19, 2007
Location: Nevada, United States
Posted: October 21, 2007 at 12:11 PM / IP Logged  
Its a commando dl100 I have the disarm hooked up to it. The truck didn't have an factory alarm just that panic alarm that operates with the original remote. The 1700G has a wire for (-) panic input connect this wire to  the auxiliary channel output from the alarm system to use the vehicles factory panic alarm???

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Sunday, June 2, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer