2003 honda crv parking lights

Hello,

This is the first install that I'm doing. I just installed a bulldog system 500 remote car starter in my wife's car. I do not know how to hook up the parking lights? I have the two wires from the car, one in the green stock alarm plug which is the parking -, and one in the kick panal which is the parking positive. I'm not sure what one to use? Both? I also can only find two wires on the car starter marked Parking light relay output, and one marked parking light relay input. The input one is already connected in the harness to 12 volts, that was already done by the manufacturer. Any suggestions?

Thank you very much for any help you can give......

Well input and output need to be the same. If you have the input hooked to 12v, you will need to attach the output to the (POS)+ parking light on the car.

If you needed (NEG)- parking lights.... you would change the input to ground..These 2 wires represent pins 87 (input), and pin 30 (output) of a standard relay.