dei 528t jaguar hid relay

Home / the12volt's Install Bay / Relays / dei 528t jaguar hid relay (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

00jag_stype

Member - Posts: 1

Joined: July 13, 2009

Location: Pennsylvania, United States

Posted: July 13, 2009 at 10:45 AM / IP Logged

I have a 2000 Jaguar S-type that was converted from halogen to HID factory assemblies/ballast/etc. Everything works good, but i would like to introduce a delay of a few seconds prior to the ballast igniting.

I have read posts for the DEI 528T, but can't come to grips with what is being posted in relation to my application. There is a relay for each headlight assembly that takes a negative trigger from the headlight switch and turns it into a 12volt positive. Can anyone illustrate exactly what wire for the 528T goes to what on the relays?

Thank you so very much for your help in advanced!

hotwaterwizard

Silver - Posts: 1,350

Joined: December 11, 2003

Location: California, United States

Posted: July 15, 2009 at 12:13 AM / IP Logged

528t_pulse_timer.pdf

John DeRosa (Hotwaterwizard)

Stockton California

When in doubt, try it out !

hotwaterwizard

Silver - Posts: 1,350

Joined: December 11, 2003

Location: California, United States

Posted: July 15, 2009 at 12:18 AM / IP Logged

dei 528t jaguar hid relay -- posted image.

John DeRosa (Hotwaterwizard)

Stockton California

When in doubt, try it out !

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: July 15, 2009 at 1:47 AM / IP Logged

John, on that diagramme you nicely showed, wish I could do that, surely it's cut blue loop for NEG pulse? Yours, H.

hotwaterwizard

Silver - Posts: 1,350

Joined: December 11, 2003

Location: California, United States

Posted: July 15, 2009 at 10:57 PM / IP Logged

To tell the truth I have never seen one of these timers.

Looks like I made a mistake.

I remade the Diagram from the one page instructions I have.

dei 528t jaguar hid relay -- posted image.

John DeRosa (Hotwaterwizard)

Stockton California

When in doubt, try it out !

hotwaterwizard

Silver - Posts: 1,350

Joined: December 11, 2003

Location: California, United States

Posted: July 15, 2009 at 11:06 PM / IP Logged

John DeRosa (Hotwaterwizard)

Stockton California

When in doubt, try it out !

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: July 16, 2009 at 1:24 AM / IP Logged

Honestly wasn't having a pop, you're normally so precise.

hotwaterwizard

Silver - Posts: 1,350

Joined: December 11, 2003

Location: California, United States

Posted: July 16, 2009 at 8:30 AM / IP Logged

It was a little confusing it was not the best wording

"Cut = Trigger Upon Negitive Going Away"

What Idiot would print that?

John DeRosa (Hotwaterwizard)

Stockton California

When in doubt, try it out !

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

dei 528t jaguar hid relay

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.