the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

battery drain on ford f150 1998


Post ReplyPost New Topic
< Prev Topic Next Topic >
bj17455 
Member - Posts: 6
Member spacespace
Joined: July 18, 2007
Location: United Kingdom
Posted: February 02, 2009 at 1:17 PM / IP Logged  
can any one help please I have had a ford f150 1998 brought to me with the battery going flat over night i have found that the drain comes from fuse 15 in the fuse box but as we have not got any information with the vehicle we dont know what runs of this fuse I know the interior lights are but is there any thing else or as anyone any ideas please many thanks BJ
bjclarkeuk
KPierson 
Platinum - Posts: 3,527
Platinum spaceThis member consistently provides reliable informationspace
Joined: April 14, 2005
Location: Ohio, United States
Posted: February 02, 2009 at 3:01 PM / IP Logged  

On a lot of vehicles the dome light circuit is also the constant power for the radio.

I would do this:

Remove fuse 15

Charge the battery up

Start the vehicle and try EVERY electronic function of the vehicle and note any that arn't working (for the radio make sure the presets and clock are being kept, if they arn't then the fuse you pulled is the memory for the radio).

Only after you identify everything that is on the fuse can you start eliminating items one by one to figure out where the problem is.

It would also be benficial to see how much current is being drawn by that circuit, as it may give a clue as to what the device is.

Kevin Pierson
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: February 04, 2009 at 4:46 PM / IP Logged  
KP is right but I can't see a dome light unless there are about 5 bulbs pulling down a battery overnight. I'd look for something else or suspect battery/alternator or both. Done any testing? e.g. set a multimeter to 10 amps , pull the fuse, see which side is still hot, place pos meter lead ther and neg other side and close car and lock up. Check the current ratings, shouldn't be more that 40-60 milliamps.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Saturday, June 8, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer