Need help with 1994 Chrysler LHS

Home / the12volt's Install Bay / Vehicle Wiring Information & File Requests / Need help with 1994 Chrysler LHS (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

mosaick

Member - Posts: 5

Joined: May 13, 2003

Location: United States

Posted: May 29, 2003 at 1:47 PM / IP Logged

I am going to install an Alpine SEC-100s in my 1994 Chrysler LHS, but I cannot find information on how to bypass existing Anti-Theft System with keyless entry or if it is possible to intergrate the new with the original.

In need of help

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: May 29, 2003 at 2:02 PM / IP Logged

If all you are installing is the Alpine unit, then you do not need to bypass the Immobilizer on the LHS, this is only for remote starter installations.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

mosaick

Member - Posts: 5

Joined: May 13, 2003

Location: United States

Posted: May 30, 2003 at 1:58 PM / IP Logged

Thank you for your help Jeff.

So, will I need to disable the original receiver? It engages when the power locks are used or with the remote(Which does not work) and is supposed to disengage with the use of the keyless remote(Which does not work) or the door key. Now when the power locks are used the alarm will go off when the key is used to open the door which is supposed to disable it. The problem is that the original Chrysler keyless receiver needs to be replaced. The cost is 219.00 just for the new Chrysler receiver. So I purchased the Alpine for 100.00 and have more features.

Thank you again for your assistance.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Need help with 1994 Chrysler LHS

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.