Installing a battery isolator 98 S10 truc

Home / the12volt's Install Bay / Vehicle Wiring Information & File Requests / Installing a battery isolator 98 S10 truc (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

adnorth5646

Member - Posts: 1

Joined: August 25, 2003

Location: United States

Posted: August 25, 2003 at 10:38 AM / IP Logged

Can anyone help me install a battery isolator in my 98 S10 pickup? I am planning on purchasing the SR 200 amp model isolator. Thank you

mj239air

Copper - Posts: 153

Joined: May 27, 2003

Location: United States

Posted: August 25, 2003 at 11:00 AM / IP Logged

What help do you need? It is pretty straight forward install. Hook battery wire to one side from front, then second wired goes to second battery. 2 smaller connectors - 1 goes to grnd, the other goes to swtchd 12volt source. try and find a 12 volt source that has about 25 amp fuse just to be on save side. shouldn't pull more than 3-4 amps, just don't want to blow a fuse.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Installing a battery isolator 98 S10 truc

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.