the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

1994 Civic EX Coupe Wiring


Post ReplyPost New Topic
< Prev Topic Next Topic >
grommet 
Member - Posts: 1
Member spacespace
Joined: July 07, 2002
Location: United States
Posted: July 07, 2002 at 6:44 PM / IP Logged  

I have been trying to figure out how to find the power window wires and have had no luck...nor do I have the length in arms that it requires to test the passenger side switch.  It's 190 degrees outside, and I'm sick of guessing...

Can anyone help me with the following:

wiring window module

wiring horn to blow when alarm tripped
wiring dome light to flash when arm or disarm with parking lights.

Thanks.

Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: July 07, 2002 at 6:57 PM / IP Logged  
  • wiring window module
    • LF WINDOW UP/DN--------RED / yellow - RED / blu--------drivers switch 
      RF WINDOW UP/DN--------blue/yel - blue/grn---------drivers kick panel   
      LR WINDOW UP/DN--------yellow - yellow/grn---------dkp, harness to rear  
      RR WINDOW UP/DN--------yellow - yellow/grn--------dkp, harness to rear
  • wiring horn to blow when alarm tripped

the12volt wrote:
Instead of trying to use the output of the flasher on the horn's relay negative coil lead from the switch, go to the relay's positive output or directly to the horn's positive lead (at the horn). The horn's negative lead should already be connected to ground. You can use this diagram for adding light flash and instead of connecting to your lights, connect the output of the flasher to the positive lead of your horn.

  • wiring dome light to flash when arm or disarm with parking lights.
    • You can attach the dome light wire to the parking light output of the alarm. BUT, you will need to reverse the polarity of the parking light wire to a (-) and also diode isolate this wire. Wire a relay like this:
      • 86+87: GROUND
      • 85 : Parking Light wire from alarm
      • 30 : Dome light wire ( diode isolate with a 3 amp diode )
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Tuesday, September 2, 2025 • Copyright © 1999-2025 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer