factory bypass ?

Home / the12volt's Install Bay / Vehicle Wiring Information & File Requests / factory bypass ? (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

perm79

Member - Posts: 4

Joined: February 18, 2004

Location: United States

Posted: February 18, 2004 at 4:52 AM / IP Logged

i have a 91 acura legend sadan and i bought a keyless entry . i want to iinstall but im wondering if the car already has what im going to install or not and if i have to bipass any thing. newby thanks

boomer_106

Silver - Posts: 710

Joined: November 25, 2003

Location: United States

Posted: February 19, 2004 at 12:27 PM / IP Logged

Acura

Legend Sedan

1991-1993

Remote Starter Wiring Colors and Notes
Function	Vehicle Color	Location
Start:	BLACK/ WHITE	IGNITION SWITCH HARNESS
Ignition #1:	BLACK / YELLOW	IGNITION SWITCH HARNESS
Ignition #2:	YELLOW	IGNITION SWITCH HARNESS
Ignition #3:	N/A
Accessory:	WHITE/ RED	IGNITION SWITCH HARNESS
Brake Light:	GREEN / WHITE (+)	SWITCH ON BRAKE PEDAL BRACKET
Tach Signal:	BLUE	AT TACH TEST CONNECTOR *
Parking Lights:	RED / BLACK (+)	DRIVER KICK PANEL
Headlights:	BLUE/RED (-)	HEADLIGHT SWITCH OR AT RELAY
OEM Alarm Disarm:	GREEN/ RED (-)	SECURITY MODULE UNDER DRIVER'S DASH
OEM Alarm Arm:	GREEN/ YELLOW (-)	RIGHT SIDE OF STEERING WHEEL
Diesel Glow Plug:
Clutch Bypass Wire:
Notes:	* Tach Test Connector (2 Pin White Plug) Is Located On Passenger Rear Of Engine Compartment On Passenger Strut Tower.

Acura

Legend Sedan

1991-1993

Alarm and Keyless Entry Wiring Colors and Notes
Function	Vehicle Color	Location
Constant +12 Volts:	WHITE	IGNITION SWITCH HARNESS
Starter Kill:	BLACK/ WHITE	IGNITION SWITCH HARNESS
Ignition +12 Volts:	BLACK / YELLOW	IGNITION SWITCH HARNESS
Dome Lights/Superv:	BLACK/ WHITE (-)	DRIVER "B" POST
OEM Horn:	BLUE/RED (-)	PIN # 8 OF # PIN CONN. OF SECURTY MOD
Power Lock:	GREEN / WHITE (-)	AT DOOR LOCK MODULE BEHIND DRIVER'S
Power Unlock:	GREEN/ RED (-)	DASH TO RIGHT OF STEERING COLUMN**
Trunk Release:	WHITE/ BLACK/ GOLD DOTS	(+) DRIVER'S KICK ***
Alarm Input Wire:	BLACK/ WHITE (-)	DRIVER "B" POST
Notes:	See Note #201- Negative Pulse Door Lock Diagram. * See Note # 232 Positive

Teamrf

Gold - Posts: 1,031

Joined: January 13, 2004

Location: United States

Posted: February 19, 2004 at 7:20 PM / IP Logged

From the tech sheet someone posted doesn't look like you have any bypassing to do. Goodluck...

~The Rookie~

Rookie of the year that is...

Don't let the smoke out of your equiptment..it doesn't go back in.

perm79

Member - Posts: 4

Joined: February 18, 2004

Location: United States

Posted: February 28, 2004 at 5:19 PM / IP Logged

thanks,

is this all i need to do for install? do i need to disable factory alarm? do i need to run any relays?

thank for the help

boomer_106

Silver - Posts: 710

Joined: November 25, 2003

Location: United States

Posted: February 28, 2004 at 7:56 PM / IP Logged

Ya according to the sheet you need to disarm the factory alarm. You can see it listed as OEM alarm disarm. If you dont when you open your doors the alarm will go off. Whether you need relays depends on the keyless system you bought. You should have stated what it was and you may have gotten more help. To get the best help always give the make and model of the system as well as the make and model for the car. The instructions that came with it will probably tell you. Good luck

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

factory bypass ?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.