03 F350 Wiring

Home / the12volt's Install Bay / Vehicle Wiring Information & File Requests / 03 F350 Wiring (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

sound decision

Member - Posts: 39

Joined: January 20, 2003

Location: Canada

Posted: April 05, 2004 at 6:51 PM / IP Logged

Looking to put in an alarm and remote start in.

any help with the wiring will be great.

thanks in advance

Search for other posts by sound decision

boomer_106

Silver - Posts: 710

Joined: November 25, 2003

Location: United States

Posted: April 05, 2004 at 10:53 PM / IP Logged

Here ya go bud.

Ford

Pickup - Fullsize

2003

Remote Starter Wiring Colors and Notes
Function	Vehicle Color	Location
Start:	RED / Blue	Ignition Switch Harness*
Ignition #1:	Blue/Green	Ignition Switch Harness
Ignition #2:	Gray / YELLOW	Ignition Switch Harness
Ignition #3:	RED / Black	Ignition Switch Harness ****
Accessory:	BLACK/ Green	Ignition Switch Harness
Brake Light:	Green	At Brake Switch
Tach Signal:	Blue/Green or GREEN / WHITE	At Coil Pack On Engine
Parking Lights:	Brown (+)	At Headlight Switch
Headlights:	RED / Yellow	At Headlight Switch
OEM Alarm Disarm:	GREEN/ Purple	Drivers Kick Panel
OEM Alarm Arm:	No Color Available	Please call with information
Diesel Glow Plug:	No Color Available	Please call with information
Clutch Bypass Wire:	No Color Available	Please call with information
Notes:	Most models equipped with Transponder Anti-Theft System - Use Universal Alarm Bypass Module. ***All DesignTech remote starters except the 2xx22 have an ignition 3 output - it is the WHITE/ black in the 'control harness.' This wire will be used to control a relay which will power ignition 3. It will also be used to control the bypass module, if needed.

Ford

Pickup - Fullsize

2003

Alarm and Keyless Entry Wiring Colors and Notes
Function	Vehicle Color	Location
Constant +12 Volts:	Yellow and GREEN/ Purple	Ignition Switch Harness
Starter Kill:	RED / Blue	Ignition Switch Harness*
Ignition +12 Volts:	Blue/Green	Ignition Switch Harness
Dome Lights/Superv:	BLACK/ Blue	Passenger Kick Panel*
OEM Horn:	Dark Blue	Plug to right of Steering Column Harnessing column**
Power Lock:	Pink / YELLOW	Driver Kick Panel***
Power Unlock:	Pink/Green	Above Parking Brake
Trunk Release:	N/A
Alarm Input Wire:	BLACK/ Blue	Passenger Kick Panel*
Notes:	* For alarm trigger use passenger kick panel location. For domelight supervision only it is ok to use drivers kick panel location. CAUTION ON THE HORN - The Plug containing horn wire also has air-bag wires! The correct Blue wire for horn will measure 12 volts when you are NOT pressing the horn. The wire will measure zero volts when the horn is sounding. USE EXTREME CAUTION WHEN TESTING! USE ONLY A DIGITAL MULTI-METER SET FOR DC VOLTS! FAILURE TO TEST PROPERLY CAN RESULT IN AIR-BAG INFLATION/DAMAGE AND PERSONAL INJURY/PROPERTY DAMAGE. *With OEM Keyless the lock system is negative trigger. Without, the system is reverse polarity - see Note #203

sound decision

Member - Posts: 39

Joined: January 20, 2003

Location: Canada

Posted: April 06, 2004 at 12:16 AM / IP Logged

thanks for the help...

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

03 F350 Wiring

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.