Headrest Flush Look

Home / the12volt's Install Bay / Mobile Video, GPS, and Navigation / Headrest Flush Look (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Legrones

Copper - Posts: 75

Joined: April 17, 2003

Location: United States

Posted: May 13, 2003 at 11:02 PM / IP Logged

Hello could someone tell me how do I go by getting the nice smooth flush look in my headrest of my surburban I want the tv's so where it look like it is completely in the headrest and the shroud is not showing or is it some type of housing case i can order or buy from somewhere.

Dale / Cory

brianh

Silver - Posts: 518

Joined: August 25, 2002

Location: United States

Posted: May 18, 2003 at 8:09 PM / IP Logged

The way I do it is to not use the shroud at all. pop the screen out of the shroud and use it as your templete. Then to affix to the headrest just use some velcro on the foam. I have never had a problem doing it this way. Brian

Legrones

Copper - Posts: 75

Joined: April 17, 2003

Location: United States

Posted: May 19, 2003 at 8:35 AM / IP Logged

I also heard that people use mdf wood and place it inside the headrest and mount it in like that to

Dale / Cory

Discman

Member - Posts: 30

Joined: November 29, 2002

Location: United States

Posted: May 25, 2003 at 8:31 PM / IP Logged

You could also try mounting the shroud flush in the hrest and then flap the material over the shroud and then push in the screen.

Good Luck

Discman

Member - Posts: 30

Joined: November 29, 2002

Location: United States

Posted: May 25, 2003 at 8:35 PM / IP Logged

If you don't have the screens yet you should look at visualogic 7" screens that are pre-mounted in a replacement headrest for you. They look great and take 10 minutes to install. They are a little pricey but they save a lot of time and labor.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Headrest Flush Look

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.