the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Anyone bypassed a avic-d1 power brake?


Post ReplyPost New Topic
< Prev Topic Next Topic >
dwhs 
Member - Posts: 8
Member spacespace
Joined: August 04, 2005
Posted: August 04, 2005 at 11:50 PM / IP Logged  

I just installed it into my 350z but even after hooking up my power brake line it still gives the error that it's not hooked up. I don't mind following the rules but I think it's just not compatable with my z's power brake connection.

Is there a way to simulate the power brake connection on the avic-d1? Something from radioshack hopefully. Anyone bypassed a avic-d1 power brake? -- posted image.

Thanks, Chaze

granpa yum 
Member - Posts: 9
Member spacespace
Joined: August 03, 2005
Location: United States
Posted: August 05, 2005 at 12:57 AM / IP Logged  
dwhs wrote:

I just installed it into my 350z but even after hooking up my power brake line it still gives the error that it's not hooked up. I don't mind following the rules but I think it's just not compatable with my z's power brake connection.

Is there a way to simulate the power brake connection on the avic-d1? Something from radioshack hopefully. Anyone bypassed a avic-d1 power brake? -- posted image.

Thanks, Chaze

my honda accord does this too, but if you look in the diagnostic settings on the honda it says its always on?

Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: August 05, 2005 at 8:23 AM / IP Logged  
What is that wire looking for as far as polarity ? (-) or (+) ??
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
dwhs 
Member - Posts: 8
Member spacespace
Joined: August 04, 2005
Posted: August 05, 2005 at 11:44 AM / IP Logged  
It says to hook it up to the positive side of the ebrake connection. And I was reading in another thread that you need to connect another wire to the brake line. major wiring for my Z and still who knows if it will work.
jeremyjerm 
Member - Posts: 46
Member spacespace
Joined: December 13, 2002
Location: United States
Posted: August 08, 2005 at 2:54 PM / IP Logged  
hay fellers it should just need a ground signal every time the car is started but theres still the speed sense and gps antenna to bypass    good luck
granpa yum 
Member - Posts: 9
Member spacespace
Joined: August 03, 2005
Location: United States
Posted: August 08, 2005 at 11:11 PM / IP Logged  

i give it that but it still says parking brake improperly connected, i have my workaround done i just want the stupid message to go away

dwhs 
Member - Posts: 8
Member spacespace
Joined: August 04, 2005
Posted: August 10, 2005 at 10:17 PM / IP Logged  
granpa yum wrote:

i give it that but it still says parking brake improperly connected, i have my workaround done i just want the stupid message to go away

Any luck? I'm still in the same boat as you. Anyone bypassed a avic-d1 power brake? -- posted image.

Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: August 10, 2005 at 11:23 PM / IP Logged  

Foot Brake is PINK/BLUE (+) located at the brake pedal swtich

Parking brake is PURPLE (-) located at the base of the parking brake

You still won't be able to watch while driving unless you bypass the gyro system in the D1 unit. Once it detects movement on the VSS wire, this cuts out video feed to the monitor. Do a search for AVIC N2 on this forum and you can read the hundreds of posts about this from other member's

Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
dwhs 
Member - Posts: 8
Member spacespace
Joined: August 04, 2005
Posted: August 10, 2005 at 11:30 PM / IP Logged  

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer