the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

No Power in one headrest monitor


Post ReplyPost New Topic
< Prev Topic Next Topic >
jayblock 
Member - Posts: 1
Member spacespace
Joined: January 19, 2007
Location: United States
Posted: January 20, 2007 at 7:57 PM / IP Logged  
I bought headrest and sunvisor monitors for my 2002 Lexus IS300 off of the internet and took them to a local car electronics shop to get them installed. To say the least, I was taken for a ride. Basically, it s not an option for me to return to these scam artists ( billing my credit card for amounts above what was agreed upon) ever again. When I overlooked the work, all 4 monitors plus the Pioneer AVIC-N2 were displaying perfectly. When I got home, though, the rear passsenger headrest monitor was completely dead. After about 20 mins. it came back on. Over the past 3 weeks it would intermittantly shut off and back on every 20 mins. or so. 3 days ago, the monitor shut off, only to never come back on. I dont have a clue as to what the problem may be. Has anyone experienced this before? Is there anything I can do? I would appreciate any help anybody could give me. Thanks.  
<--Jaysin Block-->
snowboarderandy 
Member - Posts: 45
Member spacespace
Joined: November 24, 2004
Location: United States
Posted: January 21, 2007 at 1:41 AM / IP Logged  

its a loose connection in the wiring. Follow the wire that goes out the bottom of the seat to where it connects with the pioneer N2 and see if the RCA's are loose. If not, check to see if the connection to 12v power is loose.

Thanks,
Andy
Hymer 
Silver - Posts: 695
Silver spacespace
Joined: November 20, 2004
Location: United States
Posted: January 23, 2007 at 12:00 PM / IP Logged  
Some shops really take people that bring stuff in of the net for a ride. and most won't back up their work, with reason of warrenty issues. sorry to see that happen to ya. if you have 12v and the RCAs are ok, pop out the headrest monitor and look at the small plug in the back, wires pinch and the connector sometimes will come loose. or they may have jammed or broken a pin on the connector..
Tire Proz Stillwater Mn
High End Restyling and Comlete Repair

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer