battery connection options

Home / the12volt's Install Bay / General Discussion / battery connection options (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

hootie

Member - Posts: 1

Joined: January 02, 2008

Location: Maryland, United States

Posted: January 06, 2008 at 12:32 AM / IP Logged

Are Battery ring terminals acceptable for a 4 gauge 600W amp install or does the connector cause an amperage bottle neck? Do distribution terminals provide better current flow or just a cleaner connection?

tedmond

Gold - Posts: 4,610

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: January 06, 2007

Location: Ontario, Canada

Posted: January 06, 2008 at 1:09 AM / IP Logged

600 watts and 4 gauge should be sufficiant. a connection is a connection, just make sure the batt terminal is clear on residue eg rust proofing

distrib boxes allow for more that 1 amp or accessory to be installed. it also provides a nicer pro look and added protection from shorts if you have the fused type of distribution blocks.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

battery connection options

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.