fuse holder base material

Home / the12volt's Install Bay / General Discussion / fuse holder base material (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

welder

Member - Posts: 1

Joined: July 19, 2011

Location: Ohio, United States

Posted: July 19, 2011 at 1:44 PM / IP Logged

hi

i am having trouble finding 2/0 fuse holders and don't really want to cut the wire down to 1/0 .

so going to build some for anl fuses and bolts for posts and i need to find out the type of plastic to use for the base.

i will recess the bolts into the plastic . or is there a better material to use.

has any one here ever made their own fuse holders. they will be placed out of sight in the trunk so they won't be seen..

any help would be great thanks

tim

Back to Top

violent b

Member - Posts: 1

Joined: June 13, 2011

Location: Florida, United States

Posted: July 25, 2011 at 7:38 AM / IP Logged

why not use an ANL fuse holder that uses ring terminals like this one from Install Bay:

fuse holder base material -- posted image.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

fuse holder base material

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.