Custom Fuse Panel w/LED's?

I am needing some help with a project I am working on. I am building a fuse panel in my center console for all of my accessories that I am adding to my car. What I am needing help with is installing the LED's in there as well. I am wanting them to turn on when the accessories are turned on so I know the fuse is good. The LED's that I have look like LED's for car alarms. The positive wire has a red wire and the negative wire has a blue wire. Can anyone please tell me how to install these so they will work with what I need them to. I know I need to put a resistor on them but what i need to know is do I hook the red wire up to my power wire for the accessories and the blue wire to a ground or how will I do this. Any help would greatly be appreciated. If anyone wants to look at what I am doing check my website and see. http://www.cardomain.com/id/kitt350

Just hook the LEDs up to the side of the fuse that has no power when the fuse is removed.

Need to know if they are twelve volt led or two volt led?Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.