additional horn installation

Home / the12volt's Install Bay / General Discussion / additional horn installation (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

indycar02

Member - Posts: 1

Joined: November 23, 2003

Location: United States

Posted: November 23, 2003 at 11:01 AM / IP Logged

I've purchased a pair of horns I'd like to add on to my OEM horns on a 2002 Ford Ranger. I hooked a hot wire from one of the OEM horns and conntected to a "Y" connector. When I plug the wires into the add-on horns it only works if one add-on horn is hooked up. When I hook up the second horn, all the horns just click like there not enough juice to activate. Do I need to hook up an additional relay and if so, what's the procedure? Thanks

ck auto

Copper - Posts: 257

Joined: September 20, 2003

Location: Canada

Posted: November 23, 2003 at 4:27 PM / IP Logged

hi you need to add a relay.i would wire it to the factory trigger in the collumn which is yellow and green (-) at the collum be careful when testing they are run with the airbag wires.

pin 85 to yellow and green in collumn

pin 86 to 12 v

pin 30 to 12v

pin 87 to the additional horns

make sure and fuse your 12 volt connection

good luck

kirk

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

additional horn installation

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.