92 Integra, Starting Problem Solved

wut's up guy's.   Just want to fill u in with an incident that i've experienced....

I have a 92 integra.  It's in mint condition.  Just recently I was having problems with my car starting.  Ignition would go on but the car would not crank over.   So i did the basic routine of knocking my starter thinking that the solenoid is jammed and needs to be replaced..  Sure enough, it starts and decide to pick-up a brand new starter. 

So I begin the removal and instalation of the new starter which took a while...  With the new starter in, I try starting it and the thing happened.  The car wouldn't start...  So I started troubleshooting the electrical system over and over and everything was the way it should be. ..... I ended up removing and testing the starter itself and it worked like a champ...

At this point,,, 10 hours later,,,,  I was fed up..  I sat there looking at my engine and noticed that my grd wire from the tranny to the chasis was corroded like hell.........So I took a 4gauge wire and replaced my old ground and my teg started like a champ.... 

so basically, I spent 150$ sor a 2$ problem.......  at least now i know and hope that this helps someone out there with a starter problem