4 ohm DVC MA DXI

Home / the12volt's Install Bay / General Discussion / 4 ohm DVC MA DXI (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

oakleyne22

Member - Posts: 2

Joined: March 24, 2004

Location: United States

Posted: March 24, 2004 at 10:00 AM / IP Logged

I am planning to hookup one 12in. MA Audio DXI. It is 600 watts max and I plan to put it in a sealed box(is this the best for deep bass?). does anyone know the best dimensions and wiring for this small starter project. Also any suggestions on a good resonable priced amp would be great.

Clean Install

Silver - Posts: 446

Joined: January 03, 2004

Location: United States

Posted: March 26, 2004 at 9:25 PM / IP Logged

well post back with the rms rating of the sub....

that will help us out more

also the sub manual should have a recomended sealed enclosure size...also let us know what size in cubic feet it is... thanks

If we learn from each success and

each failure, then we can improve ourselves

Ravendarat

Platinum - Posts: 2,806

Joined: February 23, 2004

Location: Canada

Posted: March 26, 2004 at 10:12 PM / IP Logged

generally a ported box will play deeper but the sealed box gives you a tighter response. If you want deep go ported.

oakleyne22

Member - Posts: 2

Joined: March 24, 2004

Location: United States

Posted: March 29, 2004 at 9:31 AM / IP Logged

It is a dual voice coil 600 max 300 rms. I am thinking of putting a alpine 350 on it for now(good or bad)

Thanks for the help

Clean Install

Silver - Posts: 446

Joined: January 03, 2004

Location: United States

Posted: March 31, 2004 at 2:08 AM / IP Logged

....just make sure that the amp you get is 2ohm stable....the alpine will work just fine for you....

If we learn from each success and

each failure, then we can improve ourselves

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

4 ohm DVC MA DXI

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.