engine control computer

Home / the12volt's Install Bay / General Discussion / engine control computer (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

tazmantr

Member - Posts: 2

Joined: July 03, 2004

Posted: July 03, 2004 at 10:03 AM / IP Logged

wireing diagrame for the engine controll computer i have a bad pin and need to trace what the wire gose to

Back to Top

auex

Platinum - Posts: 5,041

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 23, 2002

Location: Arizona, United States

Posted: July 03, 2004 at 10:34 AM / IP Logged

Man I hope english isn't your primary language. What type of vehicle would help.

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Back to Top

tazmantr

Member - Posts: 2

Joined: July 03, 2004

Posted: July 03, 2004 at 11:43 AM / IP Logged

i"m sorry my spelling was off a little bit! i have a 1994 explorer limited. i keep burning up ecc"s and i need to back trace the wireing. any help would be nice ! thanks

Back to Top

Mad Scientists

Silver - Posts: 380

Joined: February 07, 2004

Location: United States

Posted: July 18, 2004 at 5:54 PM / IP Logged

If you're talking about the engine control module, your best bet would be to use a scan tool and find out why you're burning up modules.. there are probably 50+ wires on that ECM.. How many modules have you burned up? Where are they located?

Jim

Back to Top

Search for other posts by Mad Scientists

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

engine control computer

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.