Installation wires/cables

OK, I'm getting ready to severely upgrade my entire system. I have collected most of the parts, and am now getting ready to do the install. The entire interior (including headliner - needed replaced anyways)  is coming out for this, so anything that should be done at this time - is getting done.

My car is a wagon btw - I have collected NEW:

1.a Clarion DD CD/MD head unit + a VCZ625 CD/DVD/MP3 changer

2.Boston Acoustic 6.53's - front / NX-67's rear fill

3.Boston Acoustic 12.5Pro sub

4.JL 500/5 amp

Now.......about the cables and wiring - what gauge and brand do you pros use and where? Before this I had systems installed - but for $$$ purposes (I spent the budget on equipment) I will be doing this one. I've done the last 3 in my vehicles with no problem, but nothing like this. I am a PITA when it comes to noise - even some I had installed had some noise, so none of that will be tolerated in this one.

Thank you. Thank you. Thankyouverymuch.

Those are along the lines I was thinking - just wanted a second opinion before I started spending.

Thanks very much - I was beginning to think no one cared......heh heh.