tachometer install

Home / the12volt's Install Bay / General Discussion / tachometer install (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

majkowskid

Member - Posts: 1

Joined: August 23, 2004

Location: United States

Posted: February 15, 2005 at 10:21 AM / IP Logged

i have an 04 ford f150 heritage pickup with a 4.6 l v8 in it. i am trying to install an aftermarket tach in it. there is NO tach from the factory. i have purchased the ford racing distributor less ignition systems tach driver, which i was told will work. it says to tap into the crankshaft position sensor wires, which ihave, and the box will give me the tach signal i need.

i have done this and it doesn't work. i have tried tapping into a pin which i was told to on the pcm for tach signal, but that didn't work either.

anyone ever use one of these tach drivers before? any suggestions?

Race1999

Member - Posts: 2

Joined: August 13, 2004

Location: Canada

Posted: February 26, 2005 at 9:55 AM / IP Logged

I also know that you can tap into the fuel injection wires only if they are port style

secureauto

Copper - Posts: 196

Joined: January 02, 2003

Location: California, United States

Posted: March 03, 2005 at 1:27 AM / IP Logged

Look at the Tachometer info,

2004 Remote Start info

you can also try this site,

Rostra tach and VSS info

ASE Certified

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

tachometer install

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.