Grounding Issue

Home / the12volt's Install Bay / General Discussion / Grounding Issue (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Tribal_Dog

Member - Posts: 16

Joined: December 23, 2002

Location: United States

Posted: January 15, 2003 at 6:30 AM / IP Logged

I am installing some neons in my front bumper on a metal brace there. I plan to drill a hole and sand some paint off and use this for my ground.

Is this ok??? This is an area that can get wet...will that effect the ground???

thanks

brianh

Silver - Posts: 516

Joined: August 25, 2002

Location: United States

Posted: January 15, 2003 at 11:41 AM / IP Logged

It might effect is some. What you can do is take some silicone cualk and cover the head of the screw with it to keep the water off the connection. That should help on the possible rust problem. Good luck. Brian

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Grounding Issue

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.