command start CS2400

Home / the12volt's Install Bay / General Discussion / command start CS2400 (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

stanley_cups

Member - Posts: 5

Joined: February 08, 2003

Location: Canada

Posted: February 08, 2003 at 9:32 PM / IP Logged

I am trying to install the Command Start CS2400 on my 1990 Nissan Maxima. I can not find a wiring diagram for this model of Command Start. Also, I am not sure how to deal with the factory alarm.

Thanks

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: February 09, 2003 at 8:02 AM / IP Logged

Command Start CS2400/2500 Installation Diagram

Click the above link for the wiring diagram.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

stanley_cups

Member - Posts: 5

Joined: February 08, 2003

Location: Canada

Posted: February 09, 2003 at 8:47 AM / IP Logged

Thanks for the help!

How would you suggest I deal with the factory alarm?

Velocity Motors

Moderator - Posts: 12,488

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: February 09, 2003 at 9:10 AM / IP Logged

|FCTRY ALRM DISARM|lt.grn/blk/ sil dots|- |anti-theft module

There is a wire that is a (-) prior to start taht you can use from the CS2400.Attach it to this wire.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

stanley_cups

Member - Posts: 5

Joined: February 08, 2003

Location: Canada

Posted: February 09, 2003 at 8:18 PM / IP Logged

New problem...I have the unit installed and when I press the start button, the car attempts to start by cuts of before turning over. Any idea what I could be doing wrong? I doubled checked all my wiring.

Velocity Motors

Moderator - Posts: 12,488

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: February 09, 2003 at 9:35 PM / IP Logged

Make sure that both starter's wires are connected ( Second Starter Relay Diagram ) and also, make sure that the tach signal is properly learned to the unit. Default setting for the unit is a 6 cylinder.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

stanley_cups

Member - Posts: 5

Joined: February 08, 2003

Location: Canada

Posted: February 09, 2003 at 10:24 PM / IP Logged

I did make sure both starter wires are connected and have used a relay as per the relay diagram. How do I make the tach signal learn to the unit. Maybe you are onto something as this starter was in my friends intrepid. I have installed it to my Maxima. Both are 6 cylinders however.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

command start CS2400

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.