e-150 cc

Home / the12volt's Install Bay / Cruise Controls / e-150 cc (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

Robert Thomas

Member - Posts: 2

Joined: September 20, 2003

Location: United States

Posted: October 24, 2003 at 9:14 PM / IP Logged

I think that I have found a good spot to mount the control module, but now another question. I pulled the big connector from the drivers side firewall. I can't find pin 58, I found the tach wire, but I am not sure about the VSS wire. I thought I had it (gray/black) but there is another wire that looks gray/black with maybe a blueish tint, if I knew which way the plug was numbered then I could confirm the right wire.

Thanks,

Bob T

Back to Top

Geeque

Silver - Posts: 310

Joined: October 07, 2003

Location: United States

Posted: December 17, 2003 at 1:06 PM / IP Logged

Test with a volt meter, probe wire with a dmm and move throttle if a/c increases than you got it. YR and make?

Gary Kline

MECP Master Technician

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

e-150 cc

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.