Reving Engine

Home / the12volt's Install Bay / Cruise Controls / Reving Engine (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

Ponykiller87

Member - Posts: 2

Joined: October 09, 2004

Location: United States

Posted: October 10, 2004 at 1:27 AM / IP Logged

Im trying to figure out if it is possible to use the cruise control to rev the engine up. What I want to beable to do is use the accessory button on my alarm to active a simple circuit of some kind that would rev the engine up for a second or two (3000 rpm) after using the auto start. This my sound really dumb to some people but my truck has some loud pipes on it and I like showing them off. Im doing this on a 96 chevy K1500 pickup. It has the 5.0 vortec engine. I think if I had a diagram of the cruise control module I could figure it out, but pretty much any help would be good.

Thanks

Kevin

Back to Top

zargon

Copper - Posts: 186

Joined: January 27, 2003

Location: United States

Posted: October 11, 2004 at 4:21 PM / IP Logged

your not going to be able todo it with a standard cruise control, maybe a small actuator hooked to a timer modual, im sure it can be done, but i dought you can use a cruise control

zargon ruler of estranorth

Back to Top

mo12v

Platinum - Nominee - Posts: 2,748

This member consistently provides reliable information

Joined: September 30, 2003

Location: Afghanistan

Posted: October 11, 2004 at 10:45 PM / IP Logged

It can be done but U will have to configure a relay with a unit that would pulse the Servo wire that accuates the throttle. I have done that on Rostra and AR Cruise controls, but not on Factory Cruise control units.......With a little messing around, & if U know how a cruise servo works It can be done

MO

Don't Learn from Others Mistakes

You Might Be the One That Knows.

Back to Top

Ponykiller87

Member - Posts: 2

Joined: October 09, 2004

Location: United States

Posted: October 11, 2004 at 10:51 PM / IP Logged

mo,

thats what I figured, just need a wiring diagram for the stock cruise system so I know which wire needs to be powered up. I talked to the guy at the dealership and he thinks he can get it for me. Thanks.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Reving Engine

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.