2001 Dodge Dakota V6 5speed

Home / the12volt's Install Bay / Cruise Controls / 2001 Dodge Dakota V6 5speed (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

drshm

Member - Posts: 6

Joined: November 04, 2005

Location: United States

Posted: November 04, 2005 at 10:55 AM / IP Logged

I am installing a cruise control for my truck. I have never done one before. I have done several remote car starter/keyless entry systems before and car audio. I am looking for a wireing diagram for my truck for the connections i need for cruise control.. ie break pettal, VSS, i can get a list if needed:-)

Thanks

KarTuneMan

Platinum - Posts: 7,056

This member has made a donation to the12volt.com. Click here for more info.

This member consistently provides reliable information

Joined: December 14, 2004

Location: Isle Of Man

Posted: November 04, 2005 at 12:37 PM / IP Logged

Check the search button at the top right of the page...if its NOT there just hang on....someone here willl have your answer 2001 Dodge Dakota V6 5speed -- posted image.

2001 Dodge Dakota V6 5speed -- posted image.

drshm

Member - Posts: 6

Joined: November 04, 2005

Location: United States

Posted: November 04, 2005 at 1:01 PM / IP Logged

Thanks.. I did search before i asked though! :-)

mo12v

Platinum - Nominee - Posts: 2,748

Joined: September 30, 2003

Location: Afghanistan

Posted: November 04, 2005 at 4:03 PM / IP Logged

Don't know what kind of Cruise you are installing ( hope it's ROSTRA or Audiovox )

Try:

http://www.rostra.com/cruise-control.htm

2001 Dakota

VSS Wire: LOCATION 11- WHITE 32 PIN CONNECTOR OF PCM POSITION B27

VSS Wire Color: WHITE/ ORANGE

VSS Pulse: 8000

VSS Tach Wire: LOCATION 11- BLACK 32 PIN CONNECTOR OF PCM POSITION A7

Tach Signal Wire Color: BLACK/ GRAY

Brake Switch Positive: PINK/BLUE

Brake Switch Negative: WHITE/ TAN

P.S. You should use a Clutch Kit also

Don't Learn from Others Mistakes

You Might Be the One That Knows.

drshm

Member - Posts: 6

Joined: November 04, 2005

Location: United States

Posted: November 06, 2005 at 11:29 AM / IP Logged

ok cool thanks for the info... this is what i am installing

http://www.jcwhitney.com/autoparts/Product/showCustom-0/Pr-p_Product.CATENTRY_ID:2001597/c-10101/Nty-1/p-2001597/Ntx-mode+matchallpartial/N-10101/tf-Browse/s-10101/Ntk-AllTextSearchGroup?Ntt=cruise%20control

Do you know where i find the location of the VSS?

Thanks again

Chris

mo12v

Platinum - Nominee - Posts: 2,748

Joined: September 30, 2003

Location: Afghanistan

Posted: November 06, 2005 at 6:26 PM / IP Logged

PCM..............Passenger side Fender near Firewall Under Hood

WHITE 32 PIN CONNECTOR OF PCM POSITION B27

Don't Learn from Others Mistakes

You Might Be the One That Knows.

drshm

Member - Posts: 6

Joined: November 04, 2005

Location: United States

Posted: November 07, 2005 at 1:49 PM / IP Logged

ok since this is what i am installing

The electrical connectinos i will need to make are to the truck are

VSS; Tach; Break Peddle; Clutch; Ground, Power, and Ignition? these are aside from the connectons to the cruise module and so forth. they are just the connections i make to the Car?

I ask this cause the DISTRUCTIONS! 2001 Dodge Dakota V6 5speed -- posted image. aren't very good!!

Thanks again for all the help!!

mo12v

Platinum - Nominee - Posts: 2,748

Joined: September 30, 2003

Location: Afghanistan

Posted: November 07, 2005 at 10:05 PM / IP Logged

Not sure of your Question????

Don't Learn from Others Mistakes

You Might Be the One That Knows.

drshm

Member - Posts: 6

Joined: November 04, 2005

Location: United States

Posted: November 08, 2005 at 7:22 AM / IP Logged

mo12v wrote:

Not sure of your Question????

oh sorry. Im just verifying the connections that i need to make. is there anything i am missing from the post above?

Thanks

Chris

mo12v

Platinum - Nominee - Posts: 2,748

Joined: September 30, 2003

Location: Afghanistan

Posted: November 09, 2005 at 8:17 AM / IP Logged

As far as Wiring:

That is it..............VSS; Tach ( some are not needed ); Break Petal ( Cold side ); Clutch ( switch kit needed ); Ground, Power, and Ignition

Other than Clutch Switch Kit, it is a pretty straight forward install

Don't Learn from Others Mistakes

You Might Be the One That Knows.

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.