06 ram qc underseat enclosure

Home / the12volt's Install Bay / Fiberglass, Fabrication, and Interiors / 06 ram qc underseat enclosure (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

widebodycrxsi

Member - Posts: 3

Joined: June 29, 2008

Location: Pennsylvania, United States

Posted: June 29, 2008 at 8:39 AM / IP Logged

2 12" Alpine Type-R's

Alpine MRD M1001

Alpine MRV-F340

Kickers Components 5.25" rear 6.5" front

Kenwood Deck

2AWG Power and Ground Wire

8Awg Sub wire

2.4Farad Capacitor

06 ram qc underseat enclosure -- posted image.

Back to Top

i am an idiot

Platinum - Posts: 13,670

This member consistently provides reliable information

Joined: September 21, 2006

Location: Louisiana, United States

Posted: June 29, 2008 at 8:54 AM / IP Logged

Good looking box, looks like a lot of work. If you find that you need some more airspace out of the box, when we do those trucks, we raise the seat 3 inches with couplers and bolts. It may also help you by getting the seat away from the drivers a bit. These are not the ones we use, Do not order these. This is just a link to a similar item incase you do not know what I am talking about. There is an industrial bolt supplier in out town, that is where we get them.

http://www.strongtie.com/products/CFS/CNW.asp

Back to Top

widebodycrxsi

Member - Posts: 3

Joined: June 29, 2008

Location: Pennsylvania, United States

Posted: June 29, 2008 at 6:06 PM / IP Logged

Thanks I actually have to raise the seat around 2 inches to clear the box. My cousin did a similiar design and raised his seat 1.5" with no problems.

Back to Top

widebodycrxsi

Member - Posts: 3

Joined: June 29, 2008

Location: Pennsylvania, United States

Posted: June 29, 2008 at 6:08 PM / IP Logged

I was actually going to make some blocks drill them out and just use longer bolts?

Back to Top

upscaler

Member - Posts: 23

Joined: June 26, 2008

Location: Kentucky, United States

Posted: July 02, 2008 at 8:52 PM / IP Logged

Nice looking box. I'm just getting started in glass and I am anxious to get enough experience to do one of these type boxes.

Tim

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

06 ram qc underseat enclosure

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.