the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

sealing a blow through enclosure


Post ReplyPost New Topic
< Prev Topic Next Topic >
94chevytruck 
Member - Posts: 21
Member spacespace
Joined: June 20, 2008
Location: Texas, United States
Posted: July 07, 2008 at 4:59 PM / IP Logged  

Saw a topic about this but it was closed.

This is a good and relatively inexpensive way to seal the opening of a blow through enclosure for a sub box in the bed of a truck. its the same way one stereo shop wanted to charge me a couple hundred dollars to do. just be sure you buy quality materials and you should be good

sealing a blow through enclosure -- posted image.

If it aint broke...fix it till it is!
i am an idiot 
Platinum - Posts: 13,671
Platinum spaceThis member consistently provides reliable informationspace
Joined: September 21, 2006
Location: Louisiana, United States
Posted: July 07, 2008 at 7:01 PM / IP Logged  
Did you leave some slack in the vinyl to allow for the flex between the cab and the bed?

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, May 10, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer