what weight fiberglass cloth to use?

Home / the12volt's Install Bay / Fiberglass, Fabrication, and Interiors / what weight fiberglass cloth to use? (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

mattc90

Member - Posts: 1

Joined: August 29, 2008

Posted: August 29, 2008 at 1:45 AM / IP Logged

I've been looking online to buy fiberglass cloth/mat and i've noticed that there are many different weights... ive seen from 3/4oz all the way up to 32oz..what is the ideal weight for building sub boxes and such?

Back to Top

terry joe

Member - Posts: 1

Joined: August 29, 2008

Location: Texas, United States

Posted: August 29, 2008 at 11:20 PM / IP Logged

The smaller weight will be easyer to go around curves ect...

Back to Top

whiterob

Copper - Posts: 351

Joined: July 22, 2007

Location: United States

Posted: September 05, 2008 at 12:00 PM / IP Logged

terry joe wrote:

The smaller weight will be easyer to go around curves ect...

Lighter weight fleece will also suck up less resin which is nice.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

what weight fiberglass cloth to use?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.