subwoofer enclosure, 95 chevy ext. cab

Home / the12volt's Install Bay / Fiberglass, Fabrication, and Interiors / subwoofer enclosure, 95 chevy ext. cab (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

willieisking

Member - Posts: 6

Joined: February 15, 2009

Location: Montana, United States

Posted: February 15, 2009 at 2:47 PM / IP Logged

Does anyone know where I can find some kind of plan or template for building a top fire subwoofer enclosure for a 95 chevy extended cab truck?

Back to Top

ryan95x

Member - Posts: 24

Joined: February 01, 2009

Posted: February 15, 2009 at 8:01 PM / IP Logged

You will most likely need to fabricate something if you want it to be vehicle specific. Do you have any pictures of the area you were thinking of?

-Dual XHD6425 - HD Radio w/USB & 3.5mm in

-Power Acoustik PS4-840

-Infinity Components

-10" Clarion SW1051 in FG molded box

Back to Top

willieisking

Member - Posts: 6

Joined: February 15, 2009

Location: Montana, United States

Posted: February 16, 2009 at 11:21 AM / IP Logged

Well i want it to fit under the back seat so not a lot of room. I can still post pics if you think they will help

Back to Top

ryan95x

Member - Posts: 24

Joined: February 01, 2009

Posted: February 17, 2009 at 3:40 AM / IP Logged

I would suggest doing some measurements to see what kind of subs you can fit, I have seen the storage under the rear seats and you should probably be able to fit one, mabye two shallow mount tens. Have you used fiberglass yet?

-Dual XHD6425 - HD Radio w/USB & 3.5mm in

-Power Acoustik PS4-840

-Infinity Components

-10" Clarion SW1051 in FG molded box

Back to Top

willieisking

Member - Posts: 6

Joined: February 15, 2009

Location: Montana, United States

Posted: February 17, 2009 at 8:48 PM / IP Logged

I have never used fg. however i do know a couple guys who know how to and will walk me through it if i can't just build one out of wood and carpet it

Back to Top

ryan95x

Member - Posts: 24

Joined: February 01, 2009

Posted: February 19, 2009 at 12:15 PM / IP Logged

Pictures would help, but from what I remember you would have a pretty tough time using only wood for that box because of the compact space. If you have access to somebody that could help you with fg then I would say give them a ring and learn...

-Dual XHD6425 - HD Radio w/USB & 3.5mm in

-Power Acoustik PS4-840

-Infinity Components

-10" Clarion SW1051 in FG molded box

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

subwoofer enclosure, 95 chevy ext. cab

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.