subs mounted differently in ported box

Home / the12volt's Install Bay / Fiberglass, Fabrication, and Interiors / subs mounted differently in ported box (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

shije

Member - Posts: 2

Joined: July 20, 2009

Location: New Mexico, United States

Posted: September 24, 2009 at 12:16 AM / IP Logged

will a box built to fit 4 12" subs with a single port in the center run properly without cutting each other out... meaning 2 subs will be mounted on the top of the box and the other 2 will be on the front of the box along with the port in the middle...i have seen a bandpass box built with 2 subs back to back and was just wondering if it will work the way i was wondering

blt

Back to Top

blackcivichatch

Copper - Posts: 229

Joined: January 27, 2009

Location: Missouri, United States

Posted: September 25, 2009 at 11:20 AM / IP Logged

As long as you got all the subs wired in phase you should be good.

UNLABELED Custom Car Club President

Back to Top

Search for other posts by blackcivichatch

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

subs mounted differently in ported box

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.