styrofoam for mold

Home / the12volt's Install Bay / Fiberglass, Fabrication, and Interiors / styrofoam for mold (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

acq810z

Member - Posts: 32

Joined: February 28, 2003

Location: United States

Posted: May 20, 2003 at 10:40 PM / IP Logged

I am looking for large blocks of styrofoam to form a mold out of. Does anyone know of a supplier.

Thank

ir8st8

Member - Posts: 18

Joined: April 29, 2003

Posted: May 21, 2003 at 1:46 PM / IP Logged

how large? styrofoam melt from the resin..... try select products... they have a product called wonderfoam for sculpting and molding

"thats red to negitive and black to postive....... right?"

audiomechanic

Silver - Posts: 388

Joined: November 09, 2002

Location: United States

Posted: May 21, 2003 at 6:07 PM / IP Logged

you can go to a place that sells finerglass on more of an industrial scale and get 2 part foam. it comes in different densities the more the pound kit the harder it is. or you can buy sheets of foam. a 4 inch thick piece 18 inches x 8 feet is about $150. it is cheaper to get the 2 part foam and make it in to a sheet. the quart kit is about 30 dollars.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

styrofoam for mold

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.