leak

Home / the12volt's Install Bay / Fiberglass, Fabrication, and Interiors / leak (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Rjahr01

Copper - Posts: 57

Joined: August 04, 2002

Location: United States

Posted: July 07, 2003 at 6:55 AM / IP Logged

After i made a mold of my trunk i stretched my fleece over and started to fiberglass my box... the only problem is now i have done the entire box and i filled it up with some water to make sure it was all sealed and i found out that i have some leaks. The leaks are all where the the fleece touches the formed glass...is their anything to solve this or do i just have to keep laying more fiberglass to the inside untill it seals itself....Thanks in advance

iaudio

Copper - Posts: 82

Joined: March 17, 2003

Posted: July 07, 2003 at 7:25 PM / IP Logged

you could try puting some polyester resin in there by itself and swishing it around.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

leak

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.