spare tire well sub enclosure

Home / the12volt's Install Bay / Fiberglass, Fabrication, and Interiors / spare tire well sub enclosure (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

silverbullet00

Member - Posts: 18

Joined: May 08, 2003

Location: Canada

Posted: July 08, 2003 at 8:11 PM / IP Logged

What are the best procedures for this? Is fiberglassing necessary on the inside. Sealing it is my main concern.

Back to Top

Search for other posts by silverbullet00

iaudio

Copper - Posts: 82

Joined: March 17, 2003

Posted: July 08, 2003 at 8:45 PM / IP Logged

http://www.geocities.com/MotorCity/7165/how_to_1.htm

Back to Top

silverbullet00

Member - Posts: 18

Joined: May 08, 2003

Location: Canada

Posted: July 08, 2003 at 9:20 PM / IP Logged

Thanks alot. This will help me out very much. Is it a must though to fiberglass the tire well? Will monofoaming it seal it or no?

Back to Top

iaudio

Copper - Posts: 82

Joined: March 17, 2003

Posted: July 09, 2003 at 9:28 PM / IP Logged

You can build an enclosure using the metal of the wheelwell but it will not be as rigid as one made using fiberglass. It takes practice to get a glass box right but the results are worth it.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

spare tire well sub enclosure

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.