fiberglass help please

I'm attempting to construct a new center council from scratch, so far I'm masked and glassed a mold of the tranny hump so I have a good form fitting base. I had used chicken wire to construct what I wanted the council to look like but when I wrapped it in fleece it wasn't tight. And I glassed it any way and well I got an abortion of a center council, dips and wrinkles everywher totally took the contour of the chicken wire....obviously bad idea. Now is there a way I can remedy this and make it work? Maybe by building al the dipsl up to even surface and cutting out the wrinkles and reglassing portions, would that work? See I want a nicley curved and contoured council thats why I didn't make the frame out of would, cause it would still look "boxy".  Does anyone have any ideas of what I can do to remedy this and make it work or ideas to start over and build a deceant frame and still achieve the nice cornerless structure I want? And what do most of  you use to secure fleece when you wrap a "frame" to keep it tight like it should so  there is no sagging and you don't get a mess like I have?  Thanks to anyone who can help me out in advance..go custom or go home!!

i've never used chicken wire before, but i read somewhere that if you paper mache over the chickenwire, then glass that, it works.  I dont know, its worth a shot--you might have to use some releasing compound or something.  Good luck and let me know what you do--i might be doing something very similar.if you dont know how to fix it right, just fake it