Chambers in fiberglass box

Home / the12volt's Install Bay / Fiberglass, Fabrication, and Interiors / Chambers in fiberglass box (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

hartman

Member - Posts: 5

Joined: February 10, 2004

Posted: February 10, 2004 at 1:08 PM / IP Logged

I'm making a fiberglass box for 3 12s, but it has an MDF subframe. My question is, should I make 3 chambers for each of the subs, or just leave the space open to all the airspace? I ask because my box is going to have a fair amount of curves in it, and making chambers for each sub will be a challenge.

Hartman

pureRF

Silver - Posts: 619

Joined: July 22, 2003

Location: United States

Posted: February 10, 2004 at 3:26 PM / IP Logged

If possible do it if not then you should be fine, just reinforce it more

dream it, build it, fiberglass it

hartman

Member - Posts: 5

Joined: February 10, 2004

Posted: February 11, 2004 at 4:17 PM / IP Logged

Ok, will it effect the performance any if I don't put chambers in?

pureRF

Silver - Posts: 619

Joined: July 22, 2003

Location: United States

Posted: February 11, 2004 at 4:44 PM / IP Logged

no make sure the volume is right and u dont blow a sub or nething cause one blown sub will obviously mess up the sound of all the subs

dream it, build it, fiberglass it

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Chambers in fiberglass box

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.