Door panel

Home / the12volt's Install Bay / Fiberglass, Fabrication, and Interiors / Door panel (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

larrry29

Member - Posts: 3

Joined: March 16, 2004

Location: United States

Posted: March 16, 2004 at 6:17 AM / IP Logged

I have a 96 Geo Metro,

I want to install power door locks, what is the easiest way to get the door panel off?

I have never taken door panels off and wasn’t sure if there is anything I should be careful with, what is the best procedure on getting the panel off?

Thanks,

larrry29

Member - Posts: 3

Joined: March 16, 2004

Location: United States

Posted: March 16, 2004 at 6:44 AM / IP Logged

I have a 96 Geo Metro, want to install power door locks, what is the easiest way to get the door panel off? I have never taken door panels off and wasn’t sure if there is anything I should be careful with, what is the best procedure on getting the panel off?

93accordSE

Copper - Posts: 203

Joined: February 19, 2004

Location: United States

Posted: March 16, 2004 at 8:53 AM / IP Logged

Make sure you have all the screws out and pop it off carefully, there are alot of hidden screws in door panels so if it isnt coming off look for a possible screw. Also you have to pop off the handle lever so don't pull on it too hard.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Door panel

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.