hiding rca wires

Home / the12volt's Install Bay / Fiberglass, Fabrication, and Interiors / hiding rca wires (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

93accordSE

Copper - Posts: 203

Joined: February 19, 2004

Location: United States

Posted: October 05, 2004 at 8:02 PM / IP Logged

I pretty much have the basic idea of hiding wires. But RCA wires have the plugs on them. How would you go about hiding these in a mdf/fiberglass enclosure?

boxmaker85

Silver - Posts: 433

Joined: September 19, 2004

Location: United States

Posted: October 05, 2004 at 9:33 PM / IP Logged

Build the fg so that it has a "lip" on it. It's where the amp is "sunk" into the fg mold or the glass is built up around the ends/top and bottom of the amp and allows you to just see the amp and none of the wires/plugs. Not too hard to do but requires some patience and knowledge of fg molding/shaping.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

hiding rca wires

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.