Grand Am door panels

Home / the12volt's Install Bay / Fiberglass, Fabrication, and Interiors / Grand Am door panels (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

dowmace

Member - Posts: 23

Joined: April 10, 2004

Location: United States

Posted: November 24, 2004 at 6:59 PM / IP Logged

Hey guys I'm making new FG door panels, well modifying my stockers, and I'm taking the stock vinyl of because it's easier to glass with it off, now everyone else I've seen make door panels has done the same thing, but I can't get this crap off, any suggestions on the easiest way to get it off? I've been using a heatgun and a flat head screw driver to scrape it off, but it's just being a pain, is there a solvent I need to get? thanks in advance!

Back to Top

bomex_eclipse

Member - Posts: 46

Joined: October 25, 2004

Location: United States

Posted: November 24, 2004 at 8:10 PM / IP Logged

Just Tug On The Vinal And Follow It With A Razor Blade Cutting The Fabric From The Foam.

If You Can Imagine It Glass It!

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Grand Am door panels

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.