box building program

Home / the12volt's Install Bay / Fiberglass, Fabrication, and Interiors / box building program (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

dedlyjedly

Copper - Posts: 94

Joined: November 17, 2004

Location: United States

Posted: November 27, 2004 at 3:40 PM / IP Logged

just wondering if anyone had any first-hand experience with some good box building software. i would like the program to accomadate single-reflex bandpass, vented, sealed and possibly passive radiated boxes.

Of course free is always good, but if shareware won't get me what i really want, the prices for what you would recommend and a reason for me to spend the extra $$$ would be greatly appreciated.

also, i have a schematic of a vented enclosure as recommended by the sub manufacturer but the template is for a single sub configuration. i would like to do a dual sub box with one "common" vent. is there a rule of thumb or formula to calculate port dimensions for two using the numbers provided for 1 sub?!

thanks for your input

MECP certified, 5yrs experience, you probably otta listen bitch!!

Back to Top

auex

Platinum - Posts: 5,041

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 23, 2002

Location: Arizona, United States

Posted: November 27, 2004 at 3:55 PM / IP Logged

WinIsd. Give it a shot.

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Back to Top

dedlyjedly

Copper - Posts: 94

Joined: November 17, 2004

Location: United States

Posted: November 27, 2004 at 7:25 PM / IP Logged

where would you suggest i find that?

MECP certified, 5yrs experience, you probably otta listen bitch!!

Back to Top

/r7

Silver - Posts: 340

Joined: July 30, 2004

Location: Canada

Posted: November 28, 2004 at 1:03 AM / IP Logged

google.ca its your friend, type in winisd.

or because i know the site:

http://www.linearteam.dk/

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

box building program

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.