Molding my touch screen

I am molding in a Kenwood DDX7015 touch screen radio into my 2000 Nissan Maxima.

Here is how it looks so far.

This the trim ring glued (I used IPS Weld-on #16) in to a aftermarket install kit. The kit casme for a singlr DIN with a small pocket (UGLY)

Here it is after I used rubber bumper repair (SEMA) on it.

Complete. All I have to do Is paint it to match the grey on the bottom of the A/C controls.

Another view.

Let me know what you think.

Why won't my pics show?

I am molding in a Kenwood DDX7015 touch screen radio into my 2000 Nissan Maxima.

Here is how it looks so far.

http://storage.msn.com/x1pFkJ1fwmVRhHIBnTYz5nh9NUL1G_lndUmm620PMBty8RkNHRBx-gnxIxFKXeYhAmu4qeSxDF-OjuyMV9Zo9thPtJe3jiAHHLB6m27nN_-EHh4Q4va1czP-A

This the trim ring glued (I used IPS Weld-on #16) in to a aftermarket install kit. The kit casme for a singlr DIN with a small pocket (UGLY)

http://storage.msn.com/x1pFkJ1fwmVRhHIBnTYz5nh9NUL1G_lndUmm620PMBty8SNeOO0m6yyMe1KXvDm4vIesYoeMHMABvZoPoiIHlPIjb4IAH1DbFuyuXZeElyKYX0PO6GFz6fJOg

Here it is after I used rubber bumper repair (SEMA) on it.

http://storage.msn.com/x1pFkJ1fwmVRhHIBnTYz5nh9NUL1G_lndUmm620PMBty8TUvzPYFuFd-sLi-ZKT_ddwJLwRq55Dvynq8cB1O3BVvGFJ9vPoYCvq_EnYKEUHHf76YiBxd1zhiA

Complete. All I have to do Is paint it to match the grey on the bottom of the A/C controls.

http://storage.msn.com/x1pFkJ1fwmVRhHIBnTYz5nh9NUL1G_lndUmm620PMBty8S-lUel-jlGFXIAoU_BOJSKVJg5VR1ShppLghgc167bYhyZDyxP921MMmebCbVxyBoKyxLtGxaF-g

Another view.

Let me know what you think.

I hope this workss, Can someone tell me what I am doing wrong.

Thats what I meant about "what am I doing wrong" the pic don't work. But I posted in the 3rd post the links instead.

Thanks for the props. I will post more when it is installed and painted.