Trim question?

Home / the12volt's Install Bay / Fiberglass, Fabrication, and Interiors / Trim question? (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

rob_25

Member - Posts: 1

Joined: August 29, 2004

Posted: July 14, 2005 at 1:32 PM / IP Logged

I have a question on what size mdf, or are people using something different such as panel board to trim up there enclosures for example If I were to hide my amp in the spare tirewell under a false floor with a hole cut out w/ plexi?

Back to Top

placid warrior

Silver - Posts: 357

Joined: November 06, 2004

Location: Canada

Posted: July 14, 2005 at 2:24 PM / IP Logged

1/2" - 5/8" MDF for large flat areas to avoid flexing, but for something that isnt going to be holding any weight such as a FG cover u can use anything u need to use to get the shape.

Back to Top

Search for other posts by placid warrior

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Trim question?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.