Custom Dash Question?

Home / the12volt's Install Bay / Fiberglass, Fabrication, and Interiors / Custom Dash Question? (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

stuntjester1

Member - Posts: 36

Joined: February 24, 2005

Location: United States

Posted: July 17, 2005 at 11:20 AM / IP Logged

Ok I read up on all the stuff about make a dash, and started. As read I got some 1/2 MDF to make the sub-framing. But when I cut the top part of the dash, I can not get it to flex so it fit the stock curve of the dash to the window. I want the top to be flat and just come straight out from the windshield back and then drop down. Should I go get some 1/4 type of plywood to do this or can I do something to the MDF to make it work? I can probly force it to where i want it, but I dont thing when i get down figerglassing and everything that when i pull the dash to paint it that it flex it back out??? Any help is much needed

Back to Top

ss-installer

Silver - Posts: 444

Joined: February 27, 2005

Location: United States

Posted: July 17, 2005 at 11:27 AM / IP Logged

maybe try some 1/4 masonite.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Custom Dash Question?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.