Trim rings?

Ok all it boils down to is I need trim rings to finish my wifes fiberglass sub box. As luck would have it nobody sells what I need and to have it made EVERYBODY in Cincinnati wants $45.00-$60.00 to make them. What I am looking for are 2 rings to flush out a single 12" Alpine type R sub. Can any body make them for me or tell me where to get them for a reasonable price(under $20.00). I don't have the propper equipment to make them myself. Somebody please help me!

I'm in Lebanon(North of Cincy). If you don't have the equip, you'll prolly have to pay the money. Otherwise maybe see if a hardware store can do it but it'll prolly cost similar if even able. If you are doing this as a rare hobby, just pay I'd suggest. If its gonna be a repetitve thing I'd suggest dropping the money for the basic equip as an investment. :) Otherwise I might be able to help ya out getting a router to make them if you can get up here. The boss at work has a bunch of toys I can borrow as long as I believe you are competent enough to use em. :)1998 Monte Carlo w/

Eclipse CD8454

2xRockford 5.25" Power 2-way T152C

2xRockford 6"x9" Punch 3-way FRC4369

1xMemphis 16-MCH1300 5-channel

2xKicker 12" L5 Solobaric-2 Ohm

What thickness MDF? and what Inside Diameter size? What outside Diameter size? How many?

I had another post listed on buy and sell equipment, but now it is gone. Oh well. I am looking foe something along the lines of 1)ID 10 7/8 by OD 13 1/2 2)ID 12 1/2 by OD 13 1/2 If you could make these for me out of 1/2 inch MDF please PM me. They must be as perfect as humanly possible. Thank you.

Oh yea, I only need one of each. I do have a Roto zip but not nearly accurate enough and a pain in the butt to operate as a router.

Please somebody help me I am going crazy!

Never mind I got it to work.