Alternatives to Foam Baffles?

Home / the12volt's Install Bay / Fiberglass, Fabrication, and Interiors / Alternatives to Foam Baffles? (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

lakers08

Copper - Posts: 75

Joined: December 21, 2004

Posted: July 22, 2005 at 11:00 AM / IP Logged

I'm replacing the door speakers in my car with a component set. I applied sound dampener on both the inner and outer panels of the door. When I removed the old 6.5" pair in the front, I noticed rust and dirt around the magnet of the speakers.

I know that some people use 6-1/2" foam baffles (by XTC) around the speakers to protect them from dirt and moisture. Is there an effective alternative? They're out of stock at most places and I'd like to install the speakers in the next day or two. Cheers!

Back to Top

abovestock

Copper - Posts: 247

Joined: June 08, 2005

Location: United States

Posted: July 23, 2005 at 1:58 AM / IP Logged

Try sound domain they usually have them in stock. Good luck.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Alternatives to Foam Baffles?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.