vacuum bagging

Home / the12volt's Install Bay / Fiberglass, Fabrication, and Interiors / vacuum bagging (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

phatx96xaccord

Copper - Posts: 118

Joined: August 31, 2004

Location: United States

Posted: August 23, 2005 at 12:01 AM / IP Logged

ive heard some good things about vacuum bagging. Does anyone know where i can get a vacuum bag big enough to be able to make a mold of a head liner. roughly 6ft by 4ft

would u like your chicken original or extra crispy?

Search for other posts by phatx96xaccord

abovestock

Copper - Posts: 247

Joined: June 08, 2005

Location: United States

Posted: August 23, 2005 at 2:36 AM / IP Logged

just about any vacuume bag kit will fit that. The problem is that the vacuume is about $500.00 alone. It all depends on how big the plastic sheets are that you wrap it in. Check out fiberglast.com for info. Also in order to do it correctly you need an autoclave. That is a huge vacuume oven that gets to 1600 degrees F.. Good luck. vacuum bagging -- posted image.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

vacuum bagging

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.