Door panels

Home / the12volt's Install Bay / Fiberglass, Fabrication, and Interiors / Door panels (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

dicksonjt

Member - Posts: 2

Joined: September 27, 2005

Location: United States

Posted: September 28, 2005 at 9:22 PM / IP Logged

I know there are a lot of topics on door panels but i need to get something straight. If i want to make my whole door panel fiberglass, can i make a mold of it and then put the mold right over top of the vinyl with liquid nails or something like that?

Back to Top

phatx96xaccord

Copper - Posts: 118

Joined: August 31, 2004

Location: United States

Posted: October 01, 2005 at 11:09 PM / IP Logged

i dont think that will work to well

would u like your chicken original or extra crispy?

Back to Top

Search for other posts by phatx96xaccord

jlord16

Silver - Posts: 322

Joined: September 08, 2005

Location: Australia

Posted: October 03, 2005 at 1:53 AM / IP Logged

you COULD do it, i wuld pull the door panel off and then make a mould of the inisde, then glass the outside of the mould. This shuld make a replica of the original door panel, and then just screw this on

Clarion DB36MP

Infinity Kappa Perfect 10"

Respone 800w Mono

ALPINE MRP-F250

*Custom fabrications*

Back to Top

abovestock

Copper - Posts: 247

Joined: June 08, 2005

Location: United States

Posted: October 04, 2005 at 3:39 AM / IP Logged

Make a mold and then custom make a system to remove the pannel if need be. Try to make something along the lines of the factory pannel.

Why do you ask if I ate paint chips when I was younger?

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Door panels

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.