the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

kitty hair/ resin-VS-mat/resin?


Post ReplyPost New Topic
< Prev Topic Next Topic >
ricoshay 
Copper - Posts: 67
Copper spacespace
Joined: March 23, 2006
Location: United States
Posted: June 01, 2006 at 9:51 AM / IP Logged  
Has anyone tried using a kitty hair/resin mix as opposed to using resin and fiberglass mat?  I know it suck to sand it, but you can use a brush to "paint" it on like the "miracle mix".  Do you think it would be strong enough for an average 12" sub?...a solobaric? Just looking for opinions on a different tecnique.
djfearny2 
Silver - Posts: 810
Silver spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: September 23, 2002
Location: United States
Posted: June 01, 2006 at 10:28 AM / IP Logged  
ok you can use a brush however you will probably make more of a mess than resin is in its nature. using chop mat i know when i do resin and chop the chop gets on my gloves and brush plus resin is tacky has adhesive properties. will it stick to the kitty hair.
Jon
Installer/Help Technician
---coral springs florida---
mecp certification is not always needed. I have it and it has not helped me out at all. my experience out shines it.
ricoshay 
Copper - Posts: 67
Copper spacespace
Joined: March 23, 2006
Location: United States
Posted: June 01, 2006 at 10:40 AM / IP Logged  

it shouldn't be much more messy than the resin/filler mix should it?  Using mat and resin is really messy too so i'm willing to experiment if its strong enough. It should mix well b/c kitty hair is just filler mixed with fiberglass strands. Sanding shouldn't be too bad since the mix is self leveling and its only the structural layer.


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Sunday, April 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer