univeral size for mdf rings?

Home / the12volt's Install Bay / Fiberglass, Fabrication, and Interiors / univeral size for mdf rings? (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

5.7mopar

Member - Posts: 14

Joined: March 03, 2007

Location: United States

Posted: April 24, 2007 at 8:36 PM / IP Logged

I'm making a box for a buddy but he isn't sure what subs he's going to run yet. So I was wondering if there is a "universal" size or measurement for mdf sub rings? I'm looking for 10 and 12 inch sub ring measurements. Thanks.

Back to Top

bellsracer

Silver - Posts: 703

Joined: January 14, 2006

Location: United States

Posted: April 26, 2007 at 12:17 AM / IP Logged

There isn't a universal size per say since subs have different setups even if they are measured the same.

For example, JL's W3's (12 inches for example) have a 11" mounting hole whereas the the W7 have a 10" mounting hole.

For most subs, in my experience, 9" holes and 11" holes will fit the most subs. Again it may not be the best size for all subs.

Never send your ducks to eagle school.

The difference between ordinary and extraordinary is that little extra.

The 3Ls of life: Learn from the Past, Live for the Present, Look to the Future.

Back to Top

5.7mopar

Member - Posts: 14

Joined: March 03, 2007

Location: United States

Posted: April 26, 2007 at 1:23 AM / IP Logged

Yeah I knew there was no one size that would work for every sub. I'm just looking for a ballpark number. Something that would work more often then not. Thank you.

Back to Top

bellsracer

Silver - Posts: 703

Joined: January 14, 2006

Location: United States

Posted: April 26, 2007 at 4:01 PM / IP Logged

Then the general measurement is 1" less than the sub's stated size (9" hole for 10"sub, etc). This will fit most subs at their respective measurements.

Never send your ducks to eagle school.

The difference between ordinary and extraordinary is that little extra.

The 3Ls of life: Learn from the Past, Live for the Present, Look to the Future.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

univeral size for mdf rings?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.